DIMENSIONS :38/40 (44/46)

YOU NEED : yarn (42% cotton, 42% polyacrylate, 16% rayon; 145 m / z 50) – 500 (600) g of ground tints sectional dyeing; Knitting needles number 4; circular needles number 4; hook number 3.5; 2 buttons (diameter 38 mm).

PATTERNS AND  SCHEMES OF GUM: 

Rows in the forward and reverse directions (even numbers of loops).

Facial rows: edging, alternately 1 facial crossed, 1 purl, edging.

Purl rows: edging, alternately 1 facial, 1 purl crossed, edging.

Circular rows: alternately 1 face crossed, 1 purl.

 PATTERN:
The number of loops is a multiple of 14 + 1 + 2 edging = knit acc. scheme. On it are given facial rows. In the purl rows of the loop to knit on the pattern, facial crossed to knit the purl crossed.

Start with 1 edge and loops before rapport, repeat repeat constantly, finish with loops after rapport and 1 edge. Constantly repeat 1st to 20th rows.

Attention! 

The number of loops varies inside the rapport in height. We constantly start from the initial number of loops.

Pullover with a deep V-shaped neckline.

KNITTING DENSITY :
20 p. X 27 p. = 10 x 10 cm.

PERFORMANCE OF THE BACK:

Type on the spokes 98 (112) loops and tie a 4 cm rubber band for the strap, while evenly distributing the last purl row, add 3 s. = 101 (115) s.

Continue the work with a fan pattern.

After 40.5 cm = 110 rows (37 cm = 100 rows) from the plank, close for proym on both sides 1 x 5 p., Then in each 2nd row 2 x 2 p. And 2 x 1 p. = 79 ( 93) p.

Through 63 cm = 170 rows from the plank, close all the loops, while the average 45 p. Form the neck, the outer 17 (24) p. Shoulders.

BEFORE :
Knitting is like a back, but for a V-shaped neckline, after 29.5 cm = 80 rows from the strip, close the middle loop and finish both sides separately.

For a bevel along the inner edge, close in each 4th row 22 x 1 n. At the height of the back, the remaining 17 (24) n. Shoulders are closed.

SLEEVES:
Type 54 (58) loops on the spokes for each sleeve and tie 15 cm for the strap with an elastic band, while adding 1 p. = 55 (59) p. In the last back row.

Continue the work with a fan pattern, but for the 1st size start with 1 edge and loops from arrow A, repeat 3 times, finish with loops to arrow B and 1 edge.

At the same time, for the bevel of the sleeves, add on both sides alternately in each 6th and 8th row from the bar 6 x 1 p. (In every 4th row 10 x 1 p.) Acc. pattern = 67 (79) p.

18.5 cm = 50 rows from the plank, close the sleeves for both sides with 1 x 4 p. on both sides, then in each 2nd row 1 x 2 p., 16 x 1 p., 1 x 2 p. And 1 x 3 p. (3 x 2 p., 12 x 1 p., 3 x 2 p. And 1 x 3 p.).

After 33.5 cm = 90 rows from the plank, close the remaining 13 (17) p.

PATH FOR THE SLEEVE (2 DETAILS):

Gather 9 loops on the knitting needles and knit with an elastic band, at the same time, start and finish with 1 crossed face between edges.

After 15 cm from the initial row, close the middle loop for the button hole and tie 4 rows separately.

Then retake the middle loop and tie another 3 rows on all the loops. After that, close the loop on the picture.

ASSEMBLY :
Run shoulder seams.

For the slat dial on the circular needles along the edge of the neck 196 loops and knit with an elastic band in circular rows, while ensuring that in the middle of the front was 1 facial crossed = middle loop.

To shape the front corner of the neckline, knit 1 x 3 loops in each 2nd circular row together as follows: remove the loop in front of the middle loop and middle loop together as a front one and 1 front loop, then stretch it through the removed loops.

In the 2nd circular row, make 10 holes for the cord as follows: close 1 loop and re-dial in the next circular row. Perform the first hole on both sides 25 loops below the shoulder, then make 4 more holes with an interval of 9 n. With a slat width of 4 circular rows, close all loops in the pattern.

Sew the sleeves, complete the side seams and the seams of the sleeves.

For the cord, execute a chain of vp 180 cm long and crosswise cross it into the holes of the bar. Sacks from the inside sew in the middle to the end of the strap sleeves. Sew on the front side in the middle to the end of the strap by 1 button, half unscrew the strap out and fasten the strap.