Free
Master Class
“Pocket giraffe”
Author Lyudmila Tymoshchuk
This MK is my free author’s work.
When publishing a master class and finished works related to this description,
point me as the author!
Materials
1. Yarn Alize cotton gold yellow or any
another for the body and a little contrasting for the horns
and specks and black for the decoration of the face
2. Holofiber or synthetic fluff
3. Hook 1.75 and hook number 1
4. Eyes 3-5 mm, I use half beads, you can
also black beads
5.3cm copper wire
6.glue
Legend
● SBN – single crochet
● VP-air loop
● Pr- increase
● Decrease
● Сс-connecting post
2
Pens
1 p. – 6 loops in the amigurumi ring (6)
2-7r. -6 sc (6) 6 rows
Fold in half and knit for both walls 3 sb, do not
we stuff the part.
We leave a long thread for sewing.
Legs
1 p. – 6 loops in the amigurumi ring (6)
2-4r. – 6 PRS (6)
fasten the thread and cut, on the second leg, the thread is not
cut, we will knit the body further.
3
Body
We continue knitting further from the second leg, making 3
air loop and connect with the second leg, in place
where you finished knitting.
1 p. – knit 6 sbn along the leg, 3 sbn along the VP, 6 sbn along the second
leg, 3 sbn by VP (18)
2 p. – 5 sc., 5 ave (this is a tummy), 6 sc., Ave., 1 sc (24)
3-6 rubles. 24 PRS (24) 4 rows
7 p. – (2 PRS, UB) * 6 (18)
8 rubles – 18 sbn (18)
9 p. – (1 sbn., Ub) * 6 (12)
10-14 p. – 12 sbn (12) 5 rows
Fasten and cut the thread, leaving a long end for
sewing.
Ears
1 p. – 6 loops in the amigurumi ring (6)
Fasten the thread and leave a long end for sewing.
4
Head
1 p. – 6 loops in the amigurumi ring (6)
2 p. – 6 ave (12)
3 p. – (1 PRS., D) * 6 (18)
4 p. – (2 PRS., D) * 6 (24)
5-7r. – 24 SBN (24) 3 rows
8 p. – (2 PRS, UB) * 6 (18)
9-10 p. – 18 PRS (18)
11 p. – 6 pr (this is the forehead), 12 sbn (24)
12-13 p. – 24 PRS (24)
14 p. – (2 PRS, UB) * 6 (18)
15 p. – (1 PRS, UB) * 6 (12)
We fill the part well
16 p. – 6 kill (6)
Pull off the hole, fasten the thread and cut.
five
Horns
First, we prepare the wire, bend it with the letter P and insert
in the 13th row of the head, with the free ends up.
We make sure that the horns are the same height. Then
we take a thread of body color and divide it into fibers, we need
thread in two folds, thread it through a needle. Introduce to the head
anywhere and output at the wire exit,
we wind up the wire, and then down to the base and
insert the needle back into the head. We output in the place of the second
horn and wrap it in the same way as the first, fix the thread
in the head.
Now we will tie the balls to the ends of the horns.
We take a brown or other contrasting thread and divide
it into fibers, we need two separated strings (you can
use a floss in two or three folds).
We will crochet number 1
1 p. – 6 loops in the amigurumi ring (6)
Fasten the thread and leave a long end for sewing.
2-3 p. – 6 PRS (6)
make two decreases and hide the end of the thread inside this ball,
do not close the hole to the end, we need to put this ball on
horn.
Put some glue on the end of the horn and put a ball on top.
6
7
Assembly and design
First we sew the head to the body, sew or
glue the eyes between 10 and 11 rows, embroider
nostrils between 4 and 5 p., and a smile with a black thread about
in the 6-7th row. Sew on the ears in the same row as the horns.
Next, we sew the handles in the 10th row of the body.
We knit the ponytail. I use a thread for this which
left after sewing on the handle. I sew my hand and
I bring out the remaining end of the thread in the place where it should be
ponytail, then I take the hook and knit 4-5 ch. I cut the thread and
fluff the end a little.
Next, with a contrasting thread, we embroider specks in
random order.
Everything, our beast is ready)
Smooth loops for you