Materials: 
-Hook № 1
-Mohair yarn (500g/100m)
-Wire 1m long
-Two small black beads for eyes
-A little white fluffy yarn
-A little black or brown smooth yarn for the paws
-Glue super-moment

Shin (2 pcs): 
1 row: 6p in Ka
2 row: 6prib = 12p
3 row: (1SBN, Prib) * 6 times = 18p
4-7 Series: 18p (4 rows)
Tying the right shin thread is not cut, continue to connect the parts.

Connection: 
1 row: 4v. P., 18SBN on the left Shin, 4sbn on 4v. P., 18SBN on the right shin = 44, 5 p
2 row: 1SBN, UB, 1SBN, (Prib, 3SBN) * 10 times = 53 P
3 row: UB, 51 SBN = 52 p
4 row: 2SBN, (Prib, 7SBN) * 6 times, prib, 1SBN = 59, 5 p
5th row: 29SBN, prib, 29SBN = 60p
6 row: 60SBN = 60p
7 row: (UB, 8SBN) * 6 times = 54 p
8 row: 54 Rн = 54 P
9 row: 16SBN, (UB, 2SBB) * 5 times, UB, 16SBN = 48 p
10 row: 16SBN, (UB, 1SBN) * 5 times, UB, 15SBN = 42 p
11-13 Series: 42 SBN = 42 P

Prepare the wire frame. For this take 50-60 cm of wire, d = 0.8 -1, 0mm, to slip one end into one shin, the other end into the second shin. Align the ends of the line, make on each side of the wire loop, a length of approximately 6-10 cm, depending on what length will be the paw of the fox.

The remaining ends are temporarily twist so that they do not interfere with further knitting.
Knit around the wire frame, not forgetting to fill the carcass filler. Group Masterpieces Amaguumi Terrible do not join her
14 row: (UB, 5SBN) * 6 times = 36 P
15 row: (UB, 4 SBN) * 6 times = 30p
16 row: (UB, 3SBN) * 6 times = 24p
17 Row: (UB, 2SBN) * 6 times = 18p
18-19 Series: 18SBH = 18p

Head: 
The head is knitted from the crown. The line marker passes along the back of the head.
1 row: 6p in Ka
2 row: 6prib = 12p
3 row: (Prib, 1SBN) * 6 times = 18p
4 row: (Prib, 2SBN) * 6 times = 24p
5 row: (Prib, 3SBN) * 6 times = 30p
6 row: (Prib, 4SBN) * 6 times = 36 P
7 row: (Prib, 5SBN) * 6 times = 42 P
8 row: (Prib, 6SBN) * 6 times = 48 p
9 row: (Prib, 7SBN) * 6 times = 54 p
10 row: (Prib, 8SBN) * 6 times = 60p
11 row: (Prib, 9SBN) * 6 times = 66 p
12-23 Series: 66 Rн = 66 p (12 rows)
24 row: 19 Syun, (UB, 3SBN) * 5 times, ub, 20SBN = 60p
25 row: 19SBN, (UB, 2SBB) * 5 times, UB, 19SBN = 54 p
26 Row: 18SBN, (UB, 1SBN) * 5 times, UB, 19SBN = 48 p
27 Row: (UB, 6SBN) * 6 times = 42 P
28 Row: (UB, 5SBN) * 6 times = 36 P
29 row: 36 Rн = 36 P
30 Row: (UB, 4SBN) * 6 times = 30p
31 row: 30SBH = 30p
Fill the head with filler and continue packing on the course of knitting.
32 Series: (UB, 3SBN) * 6 times = 24p
33 Series: 24 rн = 24p
34 Series: (UB, 2SBN) * 6 times = 18p
35 Series: 18SBH = 18p
36 Series: (UB, 1SBN) * 6 times = 12p
37 Series: 12p
38 Series: 6ub = 6p
Pull the remaining loops.

Tail: 
We begin to knit white yarn.
1 row: 6p in Ka
2 row: 6prib = 12p
3 row: 12SBH = 12p
4 row: (Prib, 1SBN) * 6 times = 18p
5 row: 18SBH = 18p
6 row: (Prib, 2SBN) * 6 times = 24p
7 row: 24SBH = 24p
8 row: (Prib, 3SBN) * 6 times = 30p
9th row: 30SBN = 30p
10 row: (Prib, 4SBN) * 6 times = 36 P
11-13 Series: 36 SBN = 36 P
14-38 Series: 36 rн = 36 P (25 rows)

Change the thread to Orange: 
39-55 Series: 36 rн = 36 p (17 rows)
56 Series: (UB, 10SBN) * 3 times = 33 p

Prepare the wire frame (optional). The length of the wire depends on the tail length. Add to this length still about the same so that the skeleton could be inserted into a carcass and to bring in a neck. To ensure that the frame does not slide inside the body, wrap it with a tissue-based adhesive plaster. Insert the frame into the tail and loose the filler.

57 Series: 33 SBN = 33 P
58 Series: (UB, 9SBN) * 3 times = 30p
59 Series: 30 SBN = 30p
60 row: (UB, 8SBN) * 3 times = 27p
61 Series: 27SBN = 27p
62 Series: (UB, 7SBN) * 3 times = 24p
63 Series: 24SBH = 24p
64-65 Series: 24SBH = 24p

Breast: 
The breast is knitted with white yarn turning rows. At the end of each row make 1 VP lifting. 1 row: Dial 12 air loops. Knitting turn and starting from the second loop to touch 10sbn, 1v. P. Lifting, turn
2-3 Series: With the 1st loop of the series 10 SBN = 10p, 1v. P., turn
4 row: From the 2nd loop of the series 8SBB, 1v. P, turn
5-6 Series: From the 1st loop of the series 8SBN = 8p, 1st. V. P, turn
7 row: From the 2nd loop of the series to touch 7sbn, 1v. P, turn
8 row: With the 2nd loop of the series to touch 6SBN. Fasten the thread. Cut off.

Design: 
Insert each end of the wire from the legs in the 17th row (at its discretion), symmetrically relative to the marker. Make two wire loops by thrusting each end into the same hole. Adjust the length of the hinges, it will be the front legs. Their length must be roughly equal to the length of the hind legs. Loops twist on a spiral. Loose ends to pull into the hole of the neck.

The skeleton of a tail insert in a body, on a marker line, approximately in 5-6 a row from connection of legs. Stretch the tail wire through the carcass and bring to the hole of the neck. Sew the tail. The skeleton of a tail to be twisted together with Karkasami paws, to cut off superfluous wire. The place of fastening to wrap a adhesive plaster and to remove in a carcass. Add filler if necessary. Sew your head.

Lap Winding: 
Lightly push the knitting cloth of the leg. Apply a drop of glue and fix the orange thread. Wrap the spiral 2-3 cm down the paw and in the opposite direction. Fasten and trim the thread. Similarly, fix the thread of brown or black color where the orange thread ends. Make the winding legs to the tip and in the opposite direction.
Do the same way winding all the paws.
The tail and the breast are scratched. Sew the breast.

Ears: 
1 row: 6p in Ka
2 row: (Prib, 1SBN) * 3 times = 9p
3 row: (Prib, 2SBN) * 3 times = 12p
4 row: (PRB, 3 SBN) * 3 times = 15p
5 row: (Prib, 4VBN) * 3 times = 18p
6 row: (Prib, 2SBN) * 6 times = 24p
7 row: (Prib, 3SBN) * 6 times = 30p
8 row: (Prib, 9SBN) * 3 times = 33 p
9-14 Series: 33 SBN = 33 P
Leave the thread to be nailed.
Each ear folded in half, sew to the head. To scratch.

Make a duckling for eyes and a mouth. Embroider the tip of the spout. Make toning in the deepening of the ears, in the eyes and in the mouth. Sew the beady eyes.