DIMENSIONS : 36/38 (40/42) 44/46

YOU NEED : Yarn (100% cotton, 105 m / z 50) – 700 (750) 800 g of a silver-gray; Knitting needles, circular needles and hook number 6; packing eyelets with a diameter of 5 mm; leatherette cord.

PATTERNS FACE

GUIDE
Facial rows – facial hinges, purl rows – purl loops.
In circular rows: all loops knit facial.

GRAIN BACKING
Facial rows – purl loops, purl rows – facial loops.
In circular rows: all the loops knit purl.

PATENT LOOPS
In the faces. R. = 1 point. Remove with 1 nakidy, as a purl, in the external side. R. = knit a loop with purl nakida.

In the circular rows: in odd krug.r. = 1 p. Remove with 1 nakidu, as a purse, in even krug.r. knit the loop with the front cover.

COUNTER BELT (30 LOOP)

For the 1st half of the fold, 8 loops to remove onto the auxiliary needle, as when knitting, and this knitting needle to be placed in front of the loops of the left knitting needle, then the 1st loop of the left knit knit together with the wrong one then knit together the front 5 times with each knitting needle; at the end, remove the last loop of the auxiliary loop, knit the last loop of the auxiliary spokes with the left knitting needle together with the front loop and stretch the loop through the knitted loops;

For the 2nd half of the fold, remove the following 7 points to the auxiliary knitting needle at work, patent the loop + the previous face loop and the 1st loop from the auxiliary needle to knit together the front loop, then knit the front needle 5 times from each needle, then knit the last loop from the auxiliary knitting needle with the next loop of the left knitting needle and purl.

Attention!

Within the fold, 16 loops are reduced, 14 loops remain.

“COSA” A (ON 14 HINGES)
1–12th krug.r./r .: 1 p. Purl satin, 12 p. Face satin stitch, 1 n. Purl satin.

13th krug.r./r .: 1 purl, 12 p. Cross over to the right (= 6 p. Remove to the auxiliary knitting needle at work, 6 persons, then knit the loops from the auxiliary knitting needle), 1 purl.

14th krug.r./r .: all the loops knit on the pattern.

Constantly repeat the 1–14th krug./r.

“COSA” B (ON 14 HINGES)
Knit as “braid” A, but in the 13th krug./r. 12 p. Cross over to the left (= 6 p. Remove to the auxiliary knitting needle before work, 6 persons, then knit the loops from the auxiliary knitting needle with facial knitting needles).

UNDERCARED FOLDERS
From the right edge = edge, 2 n. Knit together the front;
from the left edge = in front of the edge 2 point. knit with a slope to the left (= 1 point. remove, as a face, 1 person. And pull the loop off through the knit one).

KNITTING DENSITY
16 p. X 25 krug.r./ r. = 10 x 10 cm, connected with the front and back purl with patent loops;
“Spit” – 14 p. = 6 cm.

ATTENTION!
Before and back knit up to the armhole in circular rows in a single cloth, then finish the parts separately.

PERFORMANCE OF THE

BACK AND BEFORE In the
X-shaped way, dial 308 (320) 332 p. On the spokes, close the work into a ring and, instead of 1 seamy row, tie 1 circular row with face loops. Mark the beginning of a circular row: it corresponds to the right (when worn) sideline.

Knit skirt, distributing the loop as follows: 19 (22) 25 p. smoothing, 1 patent claim, * 7 items. smoothing, 14 p. smoothing, 7 p. smoothing, 1 patent paragraph, 13 p. persons. smoothing, 1 patent claim, from * repeat once more, then 7 claim. smoothing, 14 p. smoothing, 7 p. smoothing, 1 patent paragraph, 19 (22) 25 p. persons. flat surface = 154 (160) 166 p. of the rear panel of the skirt. On the remaining hinges in the same way to perform the front panel of the skirt.

For flared form through 14 cm = 34 krug.r. from the initial row, subtract 12 points; to do this, before each group of purl loops 2 sec., knit together the front one and after each group of purl loops 2 sec. knit with a tilt to the left (see Underlined decreases) = 296 (308) 320 sec. 5 more times in every 8th round., while the groups of facial loops between the patent loops and the groups of purl loops bordering with them will decrease to 1 face loop = 236 (248) 260 points.

Through 32 cm = 80 circle.r. from the initial row the skirt with pleats finish: • 13 (16) 19 persons., * 30 s. of the counter crease, 1 s. persons. smoothing, from * repeat 1 more time, then 30 points of the oncoming fold, 13 (16) 19 points of persons. smooth to repeat from • repeat 1 more time. After that, the needles will remain 140 (152) 164 p.

Next, knit, distributing the loop as follows: 13 (16) 19 p. smoothing, 14 p. “braids” A, 16 p. individuals. smoothing, 14 p. “braids” B, 13 (16) 19 p. persons. smoothing = 70 (76) 82 p. for the back. The remaining 70 (76) 82 p. To distribute for the transfer as well.

Attention!

Reducing the width of the canvas due to “braids” taken into account and reflected on the pattern in the size of the folds.

After 24 cm = 60 krug.r. (21.5 cm = 54 krug.r.) 19 cm = 48 krug.r. from the end of the skirt, divide the work and first on the first 70 (76) 82 points. continue to knit the back according to the pattern in rows in the forward and reverse direction.

Simultaneously with the division of work for raglan bevels, on both sides close 1 x 3 points, then 9 times in each 4th p. (6 times alternately in each 2nd and 4th p. And 6 times in each 4th p.) And 4 times in each 4th p. and 11 times alternately in every 2nd and 4th p. underlined 1 p. underlined.

After 40 cm = 100 krug.r./ r. from the end of the skirt, the remaining 46 p. close the front for the neck.

Before finish the same.

SLEEVES In the X-
shaped way, dial the needles for each sleeve by 46 (52) 58 points and knit with the front satin stitch in rows in the forward and reverse direction.

After 1 cm = 2 p. (1.5 cm = 4 p.) 2.5 cm = 6 p. from the initial row for raglan bevels, close on both sides 1 x 3 points, then 18 (21) 24 times in each 2nd p. underscore 1 p.

After 16 cm = 40 p. (19 cm = 48 p.) 22.5 cm = 56 p. from the initial row the remaining 4p. close facial.

ASSEMBLY
Run raglan seams and sleeve seams.

To enhance the folds, fold the knitted fabric in half along the patent loops and crochet the connection. columns, while the working thread comes from the bottom. Comp. columns constantly run on the outer edge of the fold behind the patent loops to highlight the patent loops.

Front eyelets on both sides of middle 10 loops to install eyelets according to package instructions, with the first pair of eyelets to be set backing from the edge with closed loops 6 cm down, the remaining 5 pairs to be placed under the first pair with an interval of 5 cm.

Stretch cord from leatherette through the holes crosswise.