The assembly is minimal, sew the head on the front half loops of the body, cut out of felt under the eyes, eyelids and nose, gently sweep the edges of the finishing thread and sew, making out the muzzle on the picture.

It is assumed that the goat has hair on its chest, I don’t see it in the picture, but it’s in the description. Cut 10 strings of 8 cm, and in the 13th row, attach it to the front half  loops , fluff it up.

Australian humor suggests the presence of a goat mmm … Butt. To do this, under the  tail it is advised to embroider a small cross.

Did you know that the estimated population of goats is 294.5 million?

Do you know that goats are the most common in Africa?

Do you know that goats are the earliest among domesticated animals?

Abbreviations 
Bn – air loop
K – ubavka
Arr – an increase
of RLS – bar without sc
You will need: hook, suitable in size to the yarn  threads white chocolate and dark brown (I think it would be interesting to look at  the combination of colors: white, gray, black)
Ready eyes White and beige felt for the eyes and nose.

The goat itself is worth it, the author advises not to fill the neck strongly, otherwise the goat will
look at the ceiling all the time .

• If you want it to be slightly forward, tighter your legs.
• The toy is knitted in a spiral, the author advises to use a marker, to fill the details
as far as knitting.
• Finally, the author advises to tamper with details tightly, but without fanaticism, in order to
prevent excessive stretching.

Head. 

1) we start white, dial 12 w., Knit from the 2nd loop from the hook: 10 sbn, 3sbn to the
last loop, continue knitting on the other side of the chain – 10sbn, 3sbn to the
last loop. (26)
2) (10 sbn, prib x 3) x2 (32)
3) (10 sbn, (approx. Ccn) x3) x2 (38)
4) (10 sbn, (prib, 2sbn) x3) x2 ( 44)
5) (10 sbn, (app., 3 sbn) x3) x2 (50)
6) (10 sbn, (app., 4sbn) x3) x2 (56)
7) 2 sbn, 8sbn behind the back wall, 46 sbn (56)
8) – 11) sbn in a circle (56) change the thread to chocolate starting with 9 rows
12) 20 sbn, ub, 26 sbn, ub, 6 sbn (54)
13) sbn in a circle (54)
14) (13 sbn, ub (4sbn, ub) x2) x2 (48)
15) – 19) sbn in a circle (48) if the eyes are screwed in – they need to be inserted between 17 and 18  next to distance of 14 sat. (but do not forget that under the eyes there are white under-  eyelets.
20) (killed, 6 sbn) x6 (42)
21-24) sbn in a circle (42)
25) separation under the horns. 8sbn, skip 18 sat, 3sbn, skip 18 sat, 5sbn, ss.

Thread to fasten, trim.

Horns 

The darkest color. We type on the missing in the last row of the head 18 UBN

1-2) UBN in a circle (18) the author advises to fill the horns very tightly near the head and lightly – to the tips of the horns.If you want to give the horns a greater bend, insert wire into them.
3) -8) Sbn in a circle behind the back half loop. (18)
9) (kill, 4 sbn behind the back wall) x3 (15)
10) -11) sbn in a circle behind the back wall (15)
12) (kill, 3sbn behind the back wall) x3 (12)
13) -14 ) sbn in a circle behind the rear wall (12)
15) (killed, 2 sbn behind the rear wall) x3 (9)
16) -17) sbn in a circle behind the rear wall (9)
18) (killed, sbn) x3 (6) secure the thread, sew the hole.
Repeat the same for the second horn.

Beard. 

Cut 10 threads of the desired length from white yarn, fold it in half and sew or  fasten with a hook on the chin, where 8 loops were knitted by the back walls. Fan the yarn with a needle or puhoderochka.

Ears. 

2 items of chocolate color. Ears are not stuffed.
1) 6 sbn in the ring amigurumi (6)
2) (prib, cbn) x3 (9)
3) (prib, 2sbn) x3 (12)
4) (prib, 3 sbn) x3 (15)
5) (prib, 4sbn ) x3 (18)
6) (prib, 5sbn) x3 (21)
7) (prib, 6sbn) x3 (24)
8) (prib, 7sbn) x3 (27)
9) (prib, 8sbn) x3 (30)
10 ) -12) sbn in a circle (30)
13) (ass, 3 sbn) x6 (24)
14) -20) sbn in a circle (24)
21) (assassin, 2 sbn) x6 (18)
22) – 25) Sbn in a circle (18)
26) (ass, sbn) x6 (12)
27) -28) sbn in a circle (12) fasten the thread, fold the ear, slightly roll up (see picture) and Sew to the head so that they look a little forward, the upper edge of the ear  is 2 rows below the beginning of the horns

Body. 

Knit from the neck in a spiral, start with a chocolate color.
1) 6 sbn in the amigurumi ring (6)
2) increments in a circle (12)
3) (pribn) x6 (18)
4) sbn in a circle behind the rear walls (18) then we will sew the head to the neck for these half loops.
5) -9) sbn around (18)
10) (sbn, 3sbn in one) x3, 12 sbn (24)
11) (3 sbn, 3 sbn in one) x3, 12 sbn (30)
12) (5sbn, 3 sbn to one) x3, 12 sbn (36)
13) (7 sbn, 3 sbn to one) x3, 7sbn, 5sbn to the back wall (then we will cling the hair to the chest by the front walls )
14) 9 sbn, 3 sbn in one, 7 sbn, 2 sbn for back walls, 3sbn for back wall in one, 2 sbn for back walls, 7 sbn, 3 sbn in one, 12 sbn (48) in this row sbn for rear walls – the base for the tail, check the marker.
15) 11 sbn, 3 sbn in one, 10 sbn, sbn for the back wall, 3 sbn for the back wall in one, sbn for the back wall, 10 sbn, 3 sbn in one, 12 sbn (54)  Change the thread to white.
16) (13 Ubn, 3 Ubn One) x3, 12 Ubn (60)
17) (9 Ubn, prib) x6 (66)
18) (10 Ubn, increase) x6 (72)
19) (11 eb, increase) x6 (78)
20) (12 sbn, surf) x6 (84)
21) -25) sbn in a circle, go to the stomach

Belly. 
1) (skip 18 Sat, 3 Cl) x4 (12)
2) Circle backups (6)
3) Sew a hole

Legs 4 parts. 

Each leg knits separately on the left 18 loops.
1) -4) dial in on the hole and knit in a circle (18)
5) (app, 5 sbn) x3 (21)
6) -7) sbn in a circle (21)
8) (app, 6 sbn) x3 (24 )
9) -10) sbn in a circle (24)
11) (appr, 7 sbn) x3 (27)
12) -13) sbn in a circle (27)
14) (appr, 8 sbn) x3 (30)
15) – 16) sbn in a circle (30)
17) (appr, 9 sbn) x3 (33) Change the thread to the color of the horns.
18) -19) Sbn in a circle (33)
20) (appr, 10 sbn) xx3 (36) fill, fasten the thread and cut. For stability inside Soles can be inserted circles, cardboard or plastic, suitable in size.

Soles 4 details.

The color of the horns. 
1) 6 sbn in the ring amigurumi (6)
2) Prib in a circle (12)
3) (prib, sbn) x6 (18)
4) (prib, 2 sbn) x6 (24)
5) (prib, 3 sbn) x6 (30)
6) (appr, 4 sbn) x6 (36)
Fasten the thread, sew the sole to the foot, filling it tightly. Do  all the legs this way.

Tail. 

White thread the threads of 16 pieces of 7 cm, and attach them to the front half loop  that we have on the tail. We mix the same as the beard, trim a little bit, giving a V-shaped assembly.